For accurate measurement and transmission of air and other neutral gases
The SP10 has 32 measuring ranges, dip can be set, and the zero button will automatically reset
Measuring range: 0-100pa to 0-10000pa ± 50pA to ± 5000Pa
Unit of measurement: PA INH 2 O
Display resolution: 1pA 0.01inh2o
Working voltage: 10-35vdc
Output signal: 4-20a 0-10V
Environment temperature: - 10 ~ + 50 ℃
Technical reference
*Pressure medium: air or other neutral gas
*Unit of measurement: PA, in h.0
*Measurement range: 0-100pa to 0-1000opa
*Response time: 30ms
*Accuracy: ± 1.0% FS
*Resolution: 1 PA or 0.01 in h.0
*Overvoltage protection: 20KPa (sp101), 100KPA csp102)
*Circuit: miswiring protection
*Burst pressure: 30KPa (sp101), 150kPa (sp102)
*Protection grade: IP65
*Maximum load: 500q (4-20mA)
*Minimum load: 1K (o-1ov)
*Output signal: 4-20mA, 0-10V (according to model)
*Storage temperature: - 20 ~ + 70c
*Working temperature: - 10 ~ + 50c
*Cable outlet diameter: 10mm
*Size: 110 * 94 * 45mm
*Weight: About 170g
*Pressure connection: medium 5.2 barbed stainless steel pressure connection
*Power supply: 10-35vdc (2-wire system), 24 VDC / AC ± 10% (3 / 4-wire system)
*Installation position: normal vertical installation (because the sensor is placed vertically during factory calibration
When installing in other positions, press the zero key to reset automatically.